Back
Beer name

Caribbean Porter

Beer type

strong

Beer type

Caribbean Porter

Beer description Taste the Caribbean Porter and you’ll feel like the sun is shining in the land of Zion. One big hit of the roasted and smoky malts and you’ll be high on the complexity of this buffalo soldier and savouring every precious drop. So, don’t sit around waiting in vain or asking for redemption, three little birds told me this brew won’t last long. With a composed body, your taste buds will be moved by the hints of sour in the finish. Once you try the Caribbean Porter we guarantee you’ll be asking, is this love? Flavour profile
Colour:
Dark Brown
Bitterness:
Medium
Body:
Medium
Approx. Alcohol Level:
5.9% ABV
Naturally Carbonated:
Natural

STEP 1: Mix

The Day Before: Line a pot (at least 4 litres) with a mesh cleaning cloth (pulled straight from the pack).
Place the grain in a plastic zip-lock sandwich bag and crack them using a rolling pin.
Add the cracked grain and 3 litres of cold water, fit the lid and sit in the fridge overnight.

 

Brew Day: Gather up the corners of the mesh cloth and lift, allowing the liquid to drain from the grains back into the pot.
Place the strained liquid onto the stovetop, bring to the boil then remove from the heat.
Cool the liquid by placing the pot in a bath of cold water for about 15mins.
Add all the fermentable ingredients and the cooled liquid to the fermenting vessel (FV) then stir to dissolve.  Don’t be concerned if lumps of Light Dry Malt persist as they will dissolve over the course of several hours.
Top up with cold tap water to 21 litres and stir thoroughly.
Check the temperature and top up to 24 litres with warm or cool water (refrigerated if necessary) to start the brew at 21C.
Sprinkle the S-04 yeast plus the brew can yeast then fit the lid.

STEP 2: Brew

Place the FV in a location out of direct sunlight and try to ferment at 21C.
Fermentation should take around 7 to 10 days.
On day 10 check the specific gravity (SG).
Check the SG again the following day and so on.

STEP 3: Bottle

The brew is ready once the SG has stabilised over a couple of days, expect about 1008 to 1012.
Gently fill clean PET bottles to about 3cm from the top.
Add 2 carbonations drop per bottle and secure the caps (use only one carbonation drop for bottles intended to be stored for a longer period).
Store the bottles upright in a location out of direct sunlight at or above 18C.

STEP 4: Enjoy!

After at least two weeks, check for sufficient carbonation by squeezing the PET bottles.
Bottles kept unrefrigerated will improve as this style of beer is intended to be aged.
When ready to drink, chill the bottles upright.
Pour into clean glassware, leaving the sediment behind.
Expect the alcohol content to be approximately 5.9% ABV.