Beer name

Kilted IPA

Beer type


Beer type

Beer description Most brewers know of the India Pale Ale (IPA) story behind the style - being a strong beer, high in bitterness, alcohol and hop aroma (BJCP style guidelines 14A). However as much as we accept this story, there remains some possibility that IPA was supplied to the troops as a finished mid-strength beer while a higher alcohol beverage, in the form of Porter, was supplied to the Officers and gentry. This may account for the multitude of mid-strength commercial IPAs, many of which are award winning ales. This recipe is an attempt at emulating one such IPA, brewed in Scotland. Flavour profile
Approx. Alcohol Level:
3.8% ABV
Naturally Carbonated:


  • 1 x 1.7kg Original Series Real Ale 
  • 1 x 500g Coopers Light Dry Malt 
  • 1 x 300g Dark Crystal Malt Grain
  • 1 x 25g Styrian Goldings Hop Pellets
  • 1 x 25g Fuggles Hop Pellets 
  • 1 x 11.5g Fermentis S-04 yeast
  • 1 x 250g Coopers Carbonation Drops  

STEP 1: Mix

Crack the grains by placing in a plastic zip-lock sandwich bag and using a rolling pin, add to 2 litres of just boiled water, steep for 30 mins, remove the grains then bring the liquid to the boil.

Take off the heat and add 10g of fuggles pellets then let sit with a lid on for about 15 to 30 mins.

Dissolve the Light Dry Malt as per the instructions on the top flap, using the boiled liquid rather than plain hot water.

Add the contents of the IPA brew can and dissolve.

Add cold water up to the 20 litre mark and stir vigorously.

Check the brew temperature and top up to the 23 litre mark with cold or warm water to get as close as possible to 21C.

Sprinkle the S-04 and brew can yeast then fit the lid.

STEP 2: Brew

Try to ferment as close to 21C as possible.

After day 3, or once the foam has collapsed back into the brew, add the Styrian Goldings and remaining Fuggles hop pellets (we recommend wrapping them in a mesh cleaning cloth, pulled straight from the wrapper).

Fermentation has finished once the specific gravity is stable over 2 days.

STEP 3: Bottle

We recommend the use of PET bottles or reusable glass bottles designed for storing beer.

For information about kegging see the FAQ section.


Bottle the brew with a priming rate of 8g per litre (2 carbonation drops per 750ml bottle).

STEP 4: Enjoy!

Store the bottles at or above 18C for at least two weeks to allow the secondary fermentation to take place.

Expect the alcohol content to be around 3.8% ABV.

Join the Coopers Club to record and save your brews today! JOIN HERE